Smart BMS with GPS for Electric Vehicle(E-bicycles / E-tricycles / Low-speed Vehicle).
4S；6~8S；9~24S；30~60A；70~200A；Li-ion/LiFePO4/LTO
Built-in Bluetooth；APP+lOT Remote Management

Lithium Battery Bms 4S-24S 30A-200A 12V-72V Lifepo4 Li-ion LTO Batteries for E-bikes, E-trikes, Low-Speed Cars

Smart BMS with GPS for 2/3/4 Wheeled Electric Vehicle (Electric bicycles /Electrictricycles /Low-speed Vehicle).

● Model Number: TDT-2006

● Intelligent strings(4s/6s-8s/9s-24s)

● Built-in Bluetooth

● With on/off switch interface + multiple temperature sensors.

● With RS485 + CAN + UART + Parallel + LCD + SOC display module + GPS(optional)

● High compatibility, covering the voltage range from 12V to 72V

● Smart BMS OTA Upgrades: Remote monitoring, analysis, and control of battery packstatus.

● Highly Compatible External GPS for BMS, Plug-and-Play, Triple-Mode Precision Positioning, and Low Power Control.

● Universal Design for Different Cell Number: Supports 4S, 6-8S, and 9-24S battery packs, Flexibly adapts to different application scenarios.

Product Overview Core Features Product Detail

Our advanced battery protection system (BMS) supports both LiFePO₄ and Li-NMC batteries, compatible with 4S-24S configurations (12V-72V). It ensures safety, stability, and longevity for batteries in devices from small electronics to high-performance engineering vehicles.Featuring CAN, RS485, UART, and GPS interfaces, it provides overcharge/over-discharge protection to extend battery life. Ideal for e-bikes, electric motorcycles, tricycles, and golf carts, it enables real-time data monitoring for proactive maintenance, issue detection, and performance optimization.

PDF

BMS 4S-24S 30A-300A For Lithium ion Battery Pack

Core Features & Highlights

Intelligent Remote Lithium Battery Management

①. Enables remote monitoring, analysis, and control of battery pack
status through the New Energy Smart Mobility Operations Center and
"BMSONE" APP, with support for OTA upgrades.

②. Facilitates remote and batch intelligent management of lithium
batteries via the Operations Center or BMSONE APP, aided by an
external GPS module.

③. Features cloud storage of lithium battery data and supports
multi-level sub-accounts for comprehensive management.

High-Efficiency Management of Active Balance

① Powerful Balancing Capacity：

Equipped with a 5A high-current active balancing function, it rapidly
adjusts the state of each cell in the battery pack, with balancing efficiency
far exceeding that of ordinary passive balancing solutions.

② Significant Consistency Improvement：

Through precise control by the external BMS, the differences in voltage and
capacity between cells in the battery pack are greatly reduced,
fundamentally enhancing overall consistency.

③ Efficient Energy Management：

Active balancing technology reduces energy loss, making the battery pack
more efficient in charging and discharging, and indirectly extending the
endurance or working time.

Supports GPS+BeiDou+Base Station Triple positioning

① Cloud Remote Batch Management：

Centralized cloud control for bulk device monitoring, configuration, and
scheduling cuts on-site work, saving time/costs across distributed fleets.

② BMS Remote Upgrade：

Effortless over-the-air BMS updates keep firmware/software current,
boosting safety/efficiency without downtime or manual intervention.

③ Leasing & Battery Swap Data Management：

Tracks lease/swap metrics (duration, health, frequency) for accurate billing,
optimized inventory, and data-driven service improvements.

Product Parameters

Model	TDT-2006A	TDT-2006B
Cell number	4S, 6-8S, 9-24S [Universal BMS]
Charge/Discharge Current	30A~60A	70A~200A
Size	1558512mm	2178512mm
Battery Type	Li-ion/LiFePO4,etc.
Balance Mode	Passive Balance (can connect external active balancer)
Balance Current	50mA
Communication Interfaces	CAN / RS485 / UART / GPS, etc.
Other Interfaces	ON/OFF switch interface / Heating module interface / NTC interface / Active Balance interface, etc.
Temperature Sensors	4 Cell Temp Sensors + 1 Ambient Temp Sensor + 1 MOS Temp Sensor
Charge/Discharge Ports	Common port
Bluetooth + APP	Built-in Bluetooth，APP Supports iOS/Android/HarmonyOS Systems
LCD Display	Coulomb meter screen, 2.4" / 4.3" Touch screen (Multiple sizes available)
PC Software	Can change cell number, Comprehensive data monitoring and parameter settings
Buzzer Alarm	Yes
ON/OFF Switch	Yes
Data Logging	400 records
Optional Configurations	GPS module / Heating fmodule / Release / Parallel / Active Balance module / Display, etc.
Basic Protection Functions	Overcharge / Over-discharge / Overvoltage / Overcurrent / Short circuit / Temperature protections