GPS-Enabled Smart BMS for E-Bikes, E-Tricycles, Low-Speed EVs:
4S/6~8S/9~24S Config, 30~60A;70~200A Current, Li-ion/LiFePO4/LTO Batteries.
Features Built-in Bluetooth, APP + IoT Remote Management.

Intelligent Battery Management System GPS BMS with Bluetooth, RS485, CAN for LiFePO4 12V-72V 4S~24S 30A-200A For E-Bikes, E-Tricycles

Intelligent Battery Management System (BMS) with GPS Capability for Electric Bicycles and Tricycles.

● Model Number: TDT-2006

● Size: 155*85*12mm ； 217*85*12mm

● Battery Type: Lithium-ion(NMC)/LiFePO4(LFP),etc.

● Charge/Discharge Current：30A~60A； 70A~200A

● Intelligent strings(4s/6s-8s/9s-24s)

● Built-in Bluetooth

● With on/off switch interface + multiple temperature sensors.

● With RS485 + CAN + UART + Parallel + LCD + SOC display module + GPS(optional)

● High compatibility, covering the voltage range from 12V to 72V

● Smart BMS OTA Upgrades: Remote monitoring, analysis, and control of battery packstatus.

● Highly Compatible External GPS for BMS, Plug-and-Play, Triple-Mode Precision Positioning, and Low Power Control.

Product Overview Core Features Product Detail

Our advanced battery protection system (BMS) supports both LiFePO₄ and Li-NMC batteries, compatible with 4S-24S configurations (12V-72V). It ensures safety, stability, and longevity for batteries in devices from small electronics to high-performance engineering vehicles.Featuring CAN, RS485, UART, and GPS interfaces, it provides overcharge/over-discharge protection to extend battery life. Ideal for e-bikes, electric motorcycles, tricycles, and golf carts, it enables real-time data monitoring for proactive maintenance, issue detection, and performance optimization.

PDF

BMS 4S-24S 30A-300A For Lithium ion Battery Pack

Core Features & Highlights

Intelligent Remote Lithium Battery Management

①. Enables remote monitoring, analysis, and control of battery pack
status through the New Energy Smart Mobility Operations Center and
"BMSONE" APP, with support for OTA upgrades.

②. Facilitates remote and batch intelligent management of lithium
batteries via the Operations Center or BMSONE APP, aided by an
external GPS module.

③. Features cloud storage of lithium battery data and supports
multi-level sub-accounts for comprehensive management.

Masterful Craftsmanship, Artisan-Level Exquisite Quality

① All-Aluminum Alloy Heat Sink，Highly efficient heat dissipation

120-220W/m·K High thermal conductivity；Corrosion Resistance.

② Automotive - Grade MCU

10~500μS Short-circuit protection；
±2~15mV Voltage detection accuracy；
<5% SOC error.

③ Ultra-low internal impedance MOS，Control high current stably

≤55mA Power Consumption when working；
<200uA Power Consumption in Sleep Mode.

④ Anti-surge high-power TVS，Transient high voltage absorption

Clamping time <1ns Ultra-Fast Response；
Defends against lightning/EFT transient interference；
Robust Protection.

Supports GPS+BeiDou+Base Station Triple positioning

① Cloud Remote Batch Management：

Centralized cloud control for bulk device monitoring, configuration, and
scheduling cuts on-site work, saving time/costs across distributed fleets.

② BMS Remote Upgrade：

Effortless over-the-air BMS updates keep firmware/software current,
boosting safety/efficiency without downtime or manual intervention.

③ Leasing & Battery Swap Data Management：

Tracks lease/swap metrics (duration, health, frequency) for accurate billing,
optimized inventory, and data-driven service improvements.

Product Parameters

Model	TDT-2006A	TDT-2006B
Cell number	4S, 6-8S, 9-24S [Universal BMS]
Charge/Discharge Current	30A~60A	70A~200A
Size	1558512mm	2178512mm
Battery Type	Li-ion/LiFePO4,etc.
Balance Mode	Passive Balance (can connect external active balancer)
Balance Current	50mA
Communication Interfaces	CAN / RS485 / UART / GPS, etc.
Other Interfaces	ON/OFF switch interface / Heating module interface / NTC interface / Active Balance interface, etc.
Temperature Sensors	4 Cell Temp Sensors + 1 Ambient Temp Sensor + 1 MOS Temp Sensor
Charge/Discharge Ports	Common port
Bluetooth + APP	Built-in Bluetooth，APP Supports iOS/Android/HarmonyOS Systems
LCD Display	Coulomb meter screen, 2.4" / 4.3" Touch screen (Multiple sizes available)
PC Software	Can change cell number, Comprehensive data monitoring and parameter settings
Buzzer Alarm	Yes
ON/OFF Switch	Yes
Data Logging	400 records
Optional Configurations	GPS module / Heating fmodule / Release / Parallel / Active Balance module / Display, etc.
Basic Protection Functions	Overcharge / Over-discharge / Overvoltage / Overcurrent / Short circuit / Temperature protections